Chapter 5
Setup and Configuration
1
Figure 73: SNMPv3 Configuration Screen
1. Add 2. Delete
3.
Select a row in the Users Table and click Delete. If no rows are selected, clicking Delete removes the last
entry in the table.
4.
Click Apply.
Section 5.12.4.3
Viewing SNMPv3 Access Groups
To view SNMPv3 access groups, do the following:
Navigate to Management » SNMP. The SNMP General Settings screen appears.
1.
2.
Click SNMPv3 Configuration. The SNMPv3 Configuration screen appears.
Figure 74: SNMPv3 Configuration Screen
3.
Click Access Groups. The SNMPv3 Access Groups Configuration screen appears.
80
2
RUGGEDCOM WIN
User Guide
Viewing SNMPv3 Access Groups