Viewing And Clearing Network Statistics - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
Parameter
Distance from BS
Received bytes
Received packets
Sent bytes
Sent packets
DL rate [Kb/sec]
UL rate [Kb/sec]
3. To clear the RF Statistics, click Clear statistics.
Section 3.3.3

Viewing and Clearing Network Statistics

To view LAN and RF network information and statistics, and clear the network statistics, do the following:
1. Navigate to Statistics » Network. The Network screen appears.
Figure 14: Network Screen
2. View the LAN and RF network information:
Parameter
Current LAN IP Address
Current RF IP Address
RF IP Default GW
DHCP Lease Time
3. View the network statistics in the SS Statistic Table:
Viewing and Clearing Network Statistics
Description
Displays the downlink Modulation and Coding Scheme.
Displays the estimated distance of the SS from the base station, in meters.
Displays the amount of data received by the SS, in bytes.
Displays the number of packets received by the SS.
Displays amount of data sent by the SS, in bytes.
Displays the number of packets sent by the SS.
Displays the downlink rate, in kilobits per second.
Displays the uplink rate, in kilobits per second.
Description
Displays the current SS LAN IP address. Use the LAN IP address when you access the SS
through a direct connection to its physical Ethernet port.
Displays the current SS RF IP address. Use the RF IP address when you access the SS
through the RF network.
Displays the SS default gateway on the RF network.
Displays the SS default DHCP lease time.
Chapter 3
Device Management
21