Table of Contents
Advertisement
RUGGEDCOM WIN
User Guide
Navigate to Management » NTP Server. The NTP Server screen appears.
1.
Figure 43: NTP Server Screen
2.
Configure the following parameter(s) as required:
Parameter
Enable Ntp Server
Local Time
3.
Click Apply.
Section 4.12
Locking the Device
The device can be put in a mode called Ethernet Lock. While in this mode, Ethernet ports are locked during certain
events. The device will be automatically locked during the following conditions:
• When Ethernet is disconnected.
• During system start-up, with the following exceptions:
▫ A software exception – if the reason for the system reboot was a software exception, the device will not be
locked.
▫ A reboot due to a watchdog reboot.
▫ The Reboot button was pressed.
▫ The device rebooted from the base station.
NOTE
Management traffic to/from the device will always pass through.
NOTE
The device be unlocked locally via the SS UI, or remotely via the base station.
To lock the device, do the following:
Navigate to Management » Security » Ethernet Lock. The Ethernet Lock screen appears.
1.
Locking the Device
Description
Synopsis: { True, False }
Enables or disables the NTP server.
Displays the local time advertised by the base station. The time
appears automatically in this parameter, if set in the base station.
Chapter 4
System Administration
47
Hide quick links:
Advertisement
Table of Contents
