Deleting Scanner Configurations - Siemens RUGGEDCOM WIN5123 User Manual

Chapter 5
Setup and Configuration
Parameter
Step [kHz]
End frequency [kHz]
PUSC Mode
6. If required, repeat
7. Click Apply.
8. Click Connect to begin scanning for base stations.
Section 5.2.2

Deleting Scanner Configurations

To delete scanner configurations, do the following:
NOTE
For more information about the scanner, refer to
Navigate to WiMAX. The Scanner Settings screen appears.
1.
54
Step 4 and Step 5 until all entries are added.
Description
Displays the scanning increment in the scanning range, in
kilohertz.
Displays the end of the scanning range as a frequency in kilohertz.
Synopsis: {PUSC3, PUSC2, PUSC1, All Subchannels}
Displays the PUSC mode. The base station must be set to a PUSC
mode (using the Frame Settings screen in the Base Station)
for this feature to work. Select which PUSC mode channels the
scanner will connect to.
Section 5.2.1, "Configuring the Scanner"
RUGGEDCOM WIN
User Guide
Deleting Scanner Configurations