Table of Contents
Advertisement
Chapter 5
Setup and Configuration
To configure the management VLAN options, do the following:
Navigate to Management » Remote Management » Management VLAN. The Management VLAN screen
1.
appears.
Figure 79: Management VLAN Screen
2.
Configure the following parameter(s) as required:
Parameter
VLAN ID [1-4094]
802.1p bits [0-7]
Management VLAN on LAN Port
3.
Click Apply.
Section 5.16
Configuring VLAN Tagging
VLAN tagging options include the VLAN ID number and the 802.1p priority value. The SS has the ability to tag or
untag packets with a VLAN ID where there is no switch behind the device to carry out this function. This is only
viable when there is one VLAN. If there is more than one VLAN, add a switch behind the device to tag or untag
packets.
To configure VLAN tagging, do the following:
1.
Navigate to Network » Ethernet Settings. The VLAN Tagging screen appears.
84
Description
Synopsis: { A number in the range of 1 to 4094 }
Default: 0
Displays an identifier for the management VLAN.
Synopsis: { A number in the range of 0 to 7 }
Default: 6
Sets the 802.1p priority value for the management VLAN.
Synopsis: { Enable, Disable }
Enables/Disables the management VLAN on the LAN port.
RUGGEDCOM WIN
User Guide
Configuring VLAN Tagging
Hide quick links:
Advertisement
Table of Contents
