Logging In - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
Figure 4: Windows TCP/IP Properties dialog
Assign the IP address 192.168.254.250 and the subnet 255.255.255.0.
8.
9. On the Internet Protocol (TCP/IP) Properties dialog box, click OK.
10. On the Local Area Connection Properties dialog box, click OK.
11. On the Local Area Connection Status dialog box, click Close.
12. Log in to the device to test the network settings. For more information, refer to
Section 2.2

Logging In

To log in to the device, do the following:
Launch a web browser and type https://192.168.254.251 in the address parameter.
1.
NOTE
For information on browser versions and compatibility, refer to
2. Press Enter. The browser's security message appears.
3. Continue to the Web site. The Authentication Required dialog box appears.
Figure 5: Authentication Required
Logging In
Using WIN v5.0
Section 2.2, "Logging In"
"System Requirements" .
Chapter 2
.
11