Table of Contents
Advertisement
Chapter 5
Setup and Configuration
1
Figure 65: SNMP General Settings
1. Add 2. Delete
2.
In the SNMPv2c list, select Enable or Disable.
In the SNMPv3 list, select Enable or Disable.
3.
4.
Click Apply.
Section 5.12.2
Managing SNMP Traps
This section describes how to configure and manage SNMP Traps.
CONTENTS
•
Section 5.12.2.1, "Adding SNMP Traps"
•
Section 5.12.2.2, "Deleting SNMP Traps"
•
Section 5.12.2.3, "Viewing a List of Traps"
•
Section 5.12.2.4, "Configuring Traps"
•
Section 5.12.2.5, "Sending Traps"
Section 5.12.2.1
Adding SNMP Traps
In the Managers Table, add up to five trap destination addresses. To add SNMP traps, do the following:
Navigate to Management » SNMP. The SNMP General Settings screen appears.
1.
72
2
RUGGEDCOM WIN
User Guide
Managing SNMP Traps
Hide quick links:
Advertisement
Table of Contents
