Table of Contents
Advertisement
Chapter 4
System Administration
Parameter
Severity
Category
Last Description
Last Update Time
Section 4.10.2
Clearing Alarms
To clear alarms, do the following:
1.
Navigate to Management » Alarms and Traps. The System Alarms screen appears.
Figure 42: System Alarms Screen
2.
Select an alarm from the Alarms table.
3.
Click Clear Alarm/s.
Section 4.11
Configuring the NTP Server
The RUGGEDCOM WIN can be used to take timing inputs from the base station and act as an accurate timing
source for other devices.
NOTE
Prior to enabling the NTP server, the Time Advertisement Enabled parameter must be set, on the GPS
screen in the base station. This parameter enables the NTP Server to work properly.
To enable the NTP server, do the following:
46
Description
Synopsis: {Clear, Critical, Major, Warning}
Displays the severity of the alarm.
Synopsis: {Restart, Communication, RF, Hardware, Security, Environmental, Redundancy,
Services, Link Status}
Displays the category for the alarm type.
Displays a message describing the alarm.
Displays the date and time of the most recent alarm.
RUGGEDCOM WIN
User Guide
Clearing Alarms
Hide quick links:
Advertisement
Table of Contents
