Deleting Snmpv3 Users - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
1
Figure 72: SNMPv3 Configuration Screen
1. Add 2. Delete
3. Click Add. A new row appears in the Users Table.
4. Configure the following parameter(s) as required:
Parameter
Username
Authentication Passphrase
Authentication Protocol
Privacy Passphrase
Privacy Protocol
Access Group
5. Click Apply.
Section 5.12.4.2

Deleting SNMPv3 Users

To delete an SNMPv3 user, do the following:
Navigate to Management » SNMP. The SNMP General Settings screen appears.
1.
Click SNMPv3 Configuration. The SNMPv3 Configuration screen appears.
2.
Deleting SNMPv3 Users
2
Description
The user name.
The passphrase used for authentication.
Synopsis: {HMAC-SHA1}
The authentication protocol for the user.
The passphrase used for privacy.
Synopsis: {CBC-DES}
The privacy protocol.
Associate the user with an SNMPv3 Access Group.
Chapter 5
Setup and Configuration
79