Downloading Software From An Ftp Server - Siemens RUGGEDCOM WIN5123 User Manual

Chapter 3
Device Management
Section 3.4.6

Downloading Software from an FTP Server

To download software from an FTP server to the Secondary memory bank, do the following:
Navigate to Management » SW Upgrade » SW Download. The SW Download screen appears.
1.
Figure 20: SW Download Screen
2. Configure the following parameter(s) as required:
Parameter
FTP Server IP
Directory
File Type
File Name
User Name
Password
3. Click Download.
4. View the status of the operation. For more information, refer to
Operation" .
Section 3.4.7
Managing Memory Banks
This section describes how to view, upload, copy and delete memory bank files.
CONTENTS
• Section 3.4.7.1, "Viewing Memory Bank Files"
28
Description
The IPv4 address for the FTP server from which the device software is to be downloaded.
The directory path to the device software on the FTP server.
The type of file to download:
• Package — The software package file provided with an upgrade package. For example:
ruggedupgrade.ini
• VxWorks - An operating system file. For example: vxWorks44462418.Z
• Web Resource — A web console template file. For example: web.rc
• CDC — A Common Default Configuration file. For example: BS-Val-Cdc.xml
• UV — A Unique Value file. For example: BS-Val-Unique.xml
The name of the file you want to download.
The user name used to log in to the FTP server.
The password used to log in to the FTP server.
Section 3.4.8, "Viewing the Status of an
Downloading Software from an FTP Server
RUGGEDCOM WIN
User Guide