Table of Contents
Advertisement
RUGGEDCOM WIN
User Guide
Section 5.12.2.4
Configuring Traps
To configure traps, do the following:
Navigate to Management » Alarms and Traps » Traps. The SNMP Trap Settings screen appears.
1.
Figure 68: SNMP Trap Settings
2.
Configure the following parameter(s) as required:
Parameter
Trap ID
Configuring Traps
Event Name
DuplicateNsiIp
DuplicateRfiIp
CPELocked
CPEUnlocked
ACLPacketDrop
Description
Displays the trap identification number.
Description
Duplicate LAN IP address.
Duplicate RF IP address.
The SS Ethernet port is locked to forward user data.
Only management data is permitted from the LAN.
The SS Ethernet port is unlocked to forward user data.
If the maximum permitted number of access list
entries is exceeded, packets from any new host will
be dropped. In addition to a trap being sent at the
occurence, the trap will be sent every 1000 packets.
Chapter 5
Setup and Configuration
75
Hide quick links:
Advertisement
Table of Contents
