Generating Ssh Keys - Siemens RUGGEDCOM WIN5123 User Manual

Chapter 4
System Administration
Figure 39: Load HTTPS Certificates Screen
Type a passphrase in the Private Key Passphrase box.
2.
3. Under HTTPS Certificates, select the certificate type and then click Browse.
4. Select the file to upload.
Click Load to load the certificate or key.
5.
6. Click Certificate Verify to verify the passphrase, certificate and key.
7. Click Apply.
8. Reboot the device. For more information, refer to
Section 4.9.2

Generating SSH Keys

To reboot the device and generate new SSH keys, do the following:
1. Navigate to Management » Security . The SSH Keys screen appears.
Figure 40: SSH Keys Screen
NOTE
Key generation can take up to 15 minutes to complete.
2. Click Generate SSH Keys. The device reboots and generates new SSH keys.
44
Section 4.5, "Rebooting the Device"
RUGGEDCOM WIN
User Guide
.
Generating SSH Keys