Copying Files To The Secondary Bank - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
Figure 24: Secondary Components Screen
2. Select a file from the table.
3. Click Upload File.
4. View the status of the operation. For more information, refer to
Operation" .
Section 3.4.7.3

Copying Files to the Secondary Bank

To copy files to the secondary bank, do the following:
Navigate to Management » SW Upgrade » Primary Bank. The Primary Components screen appears.
1.
Figure 25: Primary Components Screen
2. Select a file from the table.
NOTE
Before copying the file, make sure it does not already exist in the Secondary memory bank. If the
file is present in the Secondary memory bank, delete the file from the Secondary memory bank
before copying. For more information, refer to
Copying Files to the Secondary Bank
Section 3.4.8, "Viewing the Status of an
Section 3.4.7.4, "Deleting Memory Bank Files"
Chapter 3
Device Management
.
31