Configuring The Mib2 System Identification Information - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
Figure 75: SNMPv3 Access Groups Configuration
The table provides the following information:
Parameter
Group Name
Read View
Write View
Notification View
Section 5.12.5

Configuring the MIB2 System Identification Information

To configure SNMP MIB2 system identification information, do the following:
1. Navigate to Management » SNMP » MIB2 System. The SNMP - MIB2 Settings screen appears.
Figure 76: SNMP - MIB2 Settings Screen
2. Configure the following parameter(s) as required:
Parameter
sysDescr
sysObjectID
Configuring the MIB2 System Identification Information
Description
The access group name.
The read view for the access group.
The write view for the access group.
The notification view for the access group.
Description
Default: This MIB version: SS-E-12-MIB.mib
Displays the SNMP MIB version.
Default: .1.3.6.1.4.1.15004.2.7.1
Displays the RUGGEDCOM private enterprise number and object
identifier for the subscriber station SNMP subsystem.
Chapter 5
Setup and Configuration
81