Enabling/Disabling The Gps - Siemens RUGGEDCOM WIN5123 User Manual

Chapter 5
Setup and Configuration
2
6
7
8
Figure 56: Allowed BS Screen
1. Connect only to allowed BS List 2. Allowed BS List Table 3. Add Button 4. Delete Button 5. Connect only to allowed
Operator ID Box 6. Apply Button 7. Connect Button 8. Disconnect Button
3. Delete all entries in the Allowed BS List table.
4. In the Connect only to allowed Operator ID box, type the Operator ID.
Click Apply.
5.
6. Click Connect.
Section 5.4

Enabling/Disabling the GPS

If equipped with an integrated Global Positioning System (GPS), the device will transmit its position (latitude
and longitude) to the base station every second. The base station can then be polled using SNMP for the device's
coordinates, which can then be plotted using third party tracking software.
To enable or disable the GPS, do the following:
Navigate to Management » GPS » GPS. The GPS screen appears.
1.
64
3 4
1
5
Enabling/Disabling the GPS
RUGGEDCOM WIN
User Guide