Deleting Snmp Traps - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
1
Figure 66: SNMP General Settings
1. Add 2. Delete
2. Click Add. A new row appears in the Managers Table.
3. Type an IP address in the new row.
4. Click Apply.
Section 5.12.2.2

Deleting SNMP Traps

To delete SNMP traps, do the following:
1. Navigate to Management » SNMP. The SNMP General Settings screen appears.
Deleting SNMP Traps
2
Chapter 5
Setup and Configuration
73