Deleting Memory Bank Files - Siemens RUGGEDCOM WIN5123 User Manual

Chapter 3
Device Management
3. To copy a file, click Copy File.
Or
To copy all files, click Copy Directory.
4. View the status of the operation. For more information, refer to
Operation" .
Section 3.4.7.4

Deleting Memory Bank Files

To delete a file, do the following:
NOTE
Before files can be deleted, they must be copied to the Secondary bank first. For more information,
refer to Section 3.4.7.3, "Copying Files to the Secondary Bank"
Navigate to Management » SW Upgrade » Secondary Bank. The Secondary Components screen appears.
1.
Figure 26: Secondary Components Screen
2. Select a file from the table.
To delete a file, click Delete File.
3.
Or
To delete all files, click Delete Directory.
4. View the status of the operation. For more information, refer to
Operation" .
Section 3.4.8
Viewing the Status of an Operation
To view the status of an operation, navigate to Management » SW Upgrade » File Transfer Status. The File
Transfer Status appears.
32
Section 3.4.8, "Viewing the Status of an
.
Section 3.4.8, "Viewing the Status of an
Deleting Memory Bank Files
RUGGEDCOM WIN
User Guide