KEB COMBIVERT F5 Instruction Manual page 130

Error messages are always represented by an "E" in the left most
position of the display. The drive fault displays are listed and described
on the following pages. All faults are automatically reset up to an
adjustable number of times. See parameter LF.5.
Clearing the fault history
The fault history can be cleared with the following steps:
Set the display to 0.LF.98
Press Func.
Press the up arrow and the display will change to a number.
Press up or down to scroll to the value 10.
Press enter and the history will be cleared. The message noP will be
loaded into all 8 fault histories.
130
START
ENTER FUNC.
F/R SPEED
STOP
ENTER
F/R
change between
ENTER
parameter group
and parameter
offset number
ENTER
Diagnostic Parameters
change between
parameter group
and parameter
number
ENTER
F/R
ENTER
START
FUNC.
F/R SPEED
STOP
With the up, down keys
STOP
select the respective
START
parameter offset number
START
FUNC.
F/R SPEED
STOP
START
FUNC.
F/R SPEED
STOP
ENTER
F/R
change between
parameter number
and parameter
offset number
0,1,2,3...7