77. See Figure 70. Plug in
multi-connectors 34, 41, 17,
18, 19 and 20 on the top of
the CMY module on the
right-hand side of the head.
Secure the main CMY
module wireset with the cable
retaining clip A and pass it
through the gap in the rubber
shield B in the zoom/focus
module, ensuring that wiring
is held away from the color
wheel.
78. See Figure 71. Plug the
connector marked T
(arrowed) into the two-pin
thermoswitch connector
below the numbered
connectors, facing the color
wheel on the front of the
CMY module.
MAC 2000 Wash XB Upgrade Kit Installation Guide – Page 31 of 34
Figure 70
Figure 71
B
A