Martin MAC 2000 Wash Installation Manual page 19

44. Disconnect all the outer row
of zoom/focus module
multi-connectors plus the
left-hand lamp fan plug on
the front two pins of
connector 38 on the inner
row on the left-hand side of
the head, leaving the
connectors as shown in
Figure 40.
45. Disconnect all the
zoom/focus module
multi-connectors apart from
plug 15 and the effects fan
plug on the front two pins of
connector number 37 on the
right side of the head, leaving
the connectors as shown in
Figure 41.
46. See Figure 42. Lift the
zoom/focus module out of the
head and set it to one side.
MAC 2000 Wash XB Upgrade Kit Installation Guide – Page 19 of 34
Figure 40
Figure 41
Figure 42