Verifying The Smart Call Home Configuration - Cisco Nexus 5600 Series Configuration Manual

Configuring Smart Call Home
Step 2
Step 3
Step 4
Step 5
The following example shows how to enable Smart Call Home:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# callhome send diagnostic
switch(config-callhome)# callhome test
switch(config-callhome)#

Verifying the Smart Call Home Configuration

Use one of the following commands to verify the configuration:
Command
show callhome
show callhome destination-profile name
show callhome pending-diff
show callhome status
show callhome transport-email
show callhome user-def-cmds
show running-config [callhome | callhome-all]
show startup-config callhome
show tech-support callhome
OL-31641-01
Command or Action
switch(config)# callhome
switch(config-callhome) # callhome
send diagnostic
switch(config-callhome) # callhome test
switch(config)# copy running-config
startup-config
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Verifying the Smart Call Home Configuration
Purpose
Enters Smart Call Home configuration mode.
Sends the specified Smart Call Home message to
all configured destinations.
Sends a test message to all configured destinations.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Displays the status for Smart Call Home.
Displays one or more Smart Call Home destination
profiles.
Displays the differences between he pending and
running Smart Call Home configuration.
Displays the Smart Call Home status.
Displays the e-mail configuration for Smart Call
Home.
Displays CLI commands added to any alert groups.
Displays the running configuration for Smart Call
Home.
Displays the startup configuration for Smart Call
Home.
Displays the technical support output for Smart Call
Home.
135