Configuring Link Notifications - Cisco Nexus 5600 Series Configuration Manual

Configuring SNMP
MIB
CISCO-ZS-MIB
CISCO-CONFIG-MAN-MIB
Note
Note The license notifications are enabled by default.
To enable the specified notification in the global configuration mode, perform one of the following tasks:
Command
switch(config)# snmp-server enable traps
switch(config)# snmp-server enable traps aaa
[server-state-change]
switch(config)# snmp-server enable traps entity
[fru]
switch(config)# snmp-server enable traps license
switch(config)# snmp-server enable traps
port-security
switch(config)# snmp-server enable traps snmp
[authentication]

Configuring Link Notifications

You can configure which linkUp/linkDown notifications to enable on a device. You can enable the following
types of linkUp/linkDown notifications:
• cieLinkDown—Enables the Cisco extended link state down notification.
OL-31641-01
Supports no MIB objects except the
following notification:
ccmCLIRunningConfigChanged
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Configuring Link Notifications
Related Commands
snmp-server enable traps zone
snmp-server enable traps zone
default-zone-behavior-change
snmp-server enable traps zone
enhanced-zone-db-change
snmp-server enable traps zone merge-failure
snmp-server enable traps zone merge-success
snmp-server enable traps zone request-reject
snmp-server enable traps zone unsupp-mem
snmp-server enable traps config
Purpose
Enables all SNMP notifications.
Enables the AAA SNMP notifications.
Enables the ENTITY-MIB SNMP notifications.
Enables the license SNMP notification.
Enables the port security SNMP notifications.
Enables the SNMP agent notifications.
163