Licensing Requirements For Class-Based Quality-Of-Service Mib; Prerequisite For Class-Based Quality-Of-Service Mib; Guidelines And Limitations For Class-Based Quality-Of-Service Mib - Cisco Nexus 5600 Series Configuration Manual

Licensing Requirements for Class-based Quality-of-Service MIB

Class-based Quality-of-Service MIB Phase 2
Beginning from Cisco NX-OS Release 7.3(0)N1(1), the following cbQoSMIB tables are also supported by
QoS policies:
• cbQosClassMapStats
• cbQosMatchStmtStats
• cbQosQueueingStats
More detailed information on cbQoSMIB tables and elements is available at the following url:
tools.cisco.com/Support/SNMP/do/
BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.166
Licensing Requirements for Class-based Quality-of-Service MIB
This feature does not require a license. Any feature not included in a license package is bundled with the Cisco
NX-OS system images and is provided at no extra charge to you. For a complete explanation of the Cisco
NX-OS licensing scheme, see the Cisco NX-OS Licensing Guide.

Prerequisite for Class-based Quality-of-Service MIB

• You must enable QoS Statistics under show policy-map interface to view statistics under Class-based

Guidelines and Limitations for Class-based Quality-of-Service MIB

The guidelines and limitations for viewing statistics are as follows:
• Statistics can be viewed per Access Control Entry (ACE) in an Access Control List (ACL) if there is no
• Statistics can be viewed per ACE in an ACL, if there is only one ACE in the ACL and if a policer is
• Statistics cannot be viewed per ACE in an ACL, if there are more than one ACEs in an ACL and a
• The limitations above apply to QoS-based matches as well, such as match dscp dscp-list , match
• Statistics cannot be viewed with match-all rules.
• Statistics can be viewed only with match-any.
• For instances when the statistics do not get enabled without a policer, follow these steps:
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
324
Quality-of-Service MIB. For more information, refer
interface.
policer attached.
attached.
policer is attached.
precedence precedence-list and so on.
• Create a class. You can add as many rules as required.
• Create a policy-map and attach the above class to it.
• Add a dummy policer to it (if you do not require a real policer).
Class-based Quality-of-Service MIB
Enabling QoS Statistics under show policy-map
http://
OL-31641-01