Enabling One-Time Authentication For Snmp Over Tcp; Assigning Snmp Switch Contact And Location Information; Configuring The Context To Network Entity Mapping - Cisco Nexus 5600 Series Configuration Manual

Configuring SNMP

Enabling One-Time Authentication for SNMP over TCP

You can enable a one-time authentication for SNMP over a TCP session.
Command
switch(config)# snmp-server tcp-session [auth]

Assigning SNMP Switch Contact and Location Information

You can assign the switch contact information, which is limited to 32 characters (without spaces), and the
switch location.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5

Configuring the Context to Network Entity Mapping

You can configure an SNMP context to map to a logical network entity, such as a protocol instance or VRF.
Procedure
Step 1
OL-31641-01
Command or Action
switch# configuration terminal
switch(config)# snmp-server contact
name
switch(config)# snmp-server location
name
switch# show snmp
switch# copy running-config
startup-config
Command or Action
switch# configuration terminal
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Enabling One-Time Authentication for SNMP over TCP
Purpose
Enables a one-time authentication for SNMP over a
TCP session. This feature is disabled by default.
Purpose
Enters global configuration mode.
Configures sysContact, the SNMP contact name.
Configures sysLocation, the SNMP location.
(Optional)
Displays information about one or more
destination profiles.
(Optional)
Saves this configuration change.
Purpose
Enters global configuration mode.
165