Configuring Session Manager; Creating A Session; Configuring Acls In A Session - Cisco Nexus 5600 Series Configuration Manual

Configuring Session Manager

• Session Manager supports only the access control list (ACL) feature.
• You can create up to 32 configuration sessions.
• You can configure a maximum of 20,000 commands across all sessions.
Configuring Session Manager

Creating a Session

You can create up to 32 configuration sessions.
Procedure
Step 1
Step 2
Step 3

Configuring ACLs in a Session

You can configure ACLs within a configuration session.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
86
Command or Action
switch# configure session name
switch(config-s)# show configuration
session [name]
switch(config-s)# save location
Command or Action
switch# configure session name
switch(config-s)# ip access-list name
switch(config-s-acl)# permit protocol source
destination
Configuring Session Manager
Purpose
Creates a configuration session and enters session
configuration mode. The name can be any alphanumeric
string.
Displays the contents of the session.
(Optional)
Displays the contents of the session.
(Optional)
Saves the session to a file. The location can be in
bootflash or volatile.
Purpose
Creates a configuration session and enters
session configuration mode. The name can be
any alphanumeric string.
Creates an ACL.
(Optional)
Adds a permit statement to the ACL.
OL-31641-01