Configuring SNMP
Disabling SNMP
Procedure
Step 1
Step 2
Verifying the SNMP Configuration
To display SNMP configuration information, perform one of the following tasks:
Command
show snmp
show snmp community
show snmp engineID
show snmp group
show snmp sessions
show snmp trap
show snmp user
OL-31641-01
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
switch(config) # no snmp-server protocol enable
Example:
no snmp-server protocol enable
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Purpose
Enters global configuration mode.
Disables SNMP.
SNMP is disabled by default.
Purpose
Displays the SNMP status.
Displays the SNMP community strings.
Displays the SNMP engineID.
Displays SNMP roles.
Displays SNMP sessions.
Displays the SNMP notifications enabled or disabled.
Displays SNMPv3 users.
Disabling SNMP
167