Cisco Nexus 5600 Series Configuration Manual page 151

Configuring Smart Call Home
You cannot modify or delete the CiscoTAC-1 destination profile.
Note
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
The following example shows how to modify a destination profile for Smart Call Home:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# destination-profile full-text-destination email-addr
person@example.com
switch(config-callhome)# destination-profile full-text-destination message-level 5
switch(config-callhome)# destination-profile full-text-destination message-size 10000
switch(config-callhome)#
What to Do Next
Associate an alert group with a destination profile.
OL-31641-01
Command or Action
switch# configure terminal
switch(config)# callhome
switch(config-callhome)#
destination-profile {name |
full-txt-destination |
short-txt-destination} email-addr
address
destination-profile {name |
full-txt-destination |
short-txt-destination} message-level
number
switch(config-callhome)#
destination-profile {name |
full-txt-destination |
short-txt-destination} message-size
number
switch# show callhome
destination-profile [profile name]
switch(config)# copy running-config
startup-config
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Modifying a Destination Profile
Purpose
Enters global configuration mode.
Enters Smart Call Home configuration mode.
Configures an e-mail address for a user-defined or
predefined destination profile. You can configure up to
50 e-mail addresses in a destination profile.
Configures the Smart Call Home message severity level
for this destination profile. The switch sends only alerts
that have a matching or higher Smart Call Home severity
level to destinations in this profile. The range for the
number is from 0 to 9, where 9 is the highest severity
level.
Configures the maximum message size for this
destination profile. The range is from 0 to 5000000 for
full-txt-destination and the default is 2500000. The range
is from 0 to 100000 for short-txt-destination and the
default is 4000. The value is 5000000 for CiscoTAC-1,
which is not changeable.
(Optional)
Displays information about one or more destination
profiles.
(Optional)
Saves the change persistently through reboots and restarts
by copying the running configuration to the startup
configuration.
129