User Role Policies - Cisco Nexus 5600 Series Configuration Manual

Configuring User Accounts and RBAC
Feature
rscn
snmp
snmpTargetAddrEntry
snmpTargetParamsEntry
span
trapRegEntry
trunk
vsan
vsanIfvsan
wwnm
zone

User Role Policies

You can define user role policies to limit the switch resources that the user can access, or to limit access to
interfaces, VLANs, and VSANs.
User role policies are constrained by the rules defined for the role. For example, if you define an interface
policy to permit access to specific interfaces, the user does not have access to the interfaces unless you configure
a command rule for the role to permit the interface command.
If a command rule permits access to specific resources (interfaces, VLANs, or VSANs), the user is permitted
to access these resources, even if the user is not listed in the user role policies associated with that user.
OL-31641-01
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Permissions
Read and write permissions for Registered State
Change Notification (RSCN)-related commands
Read and write permissions for SNMP-related
commands
Read and write permissions for SNMP trap
target-related commands
Read and write permissions for SNMP trap target
parameter-related commands
Read and write permissions for SPAN-related
commands
Read and write permissions for SNMP trap
registry-related commands
Read and write permissions for Fibre Channel port
channel trunk-related commands
Read and write permissions for VSAN-related
commands
Read and write permissions for FCoE VLAN-VSAN
mapping command-related commands
Read and write permissions for World Wide Name
(WWN)-related commands
Read and write permissions for zoning commands
User Role Policies
73