Verifying Gir At Protocol Level - Cisco Nexus 5600 Series Configuration Manual

Verifying GIR at Protocol Level

Command
show maintenance timeout
show tech-support mmode
show {running-‐config | startup-‐config} mmode
[all]
show snapshots
show snapshots compare snapshot-name-1
snapshot-name-2 [summary | ipv4routes |
ipv6routes]
show snapshots dump snapshot-name
show snapshots sections
show system mode
Verifying GIR at Protocol Level
BGP (Maintenance mode)
Use the show bgp process command to display BGP status in maintenance mode:
switch# show bgp process
BGP Process Information
BGP Process ID
BGP Protocol Started, reason:
BGP Protocol Tag
BGP Protocol State
BGP MMODE
BGP Memory State
BGP asformat
BGP attributes information
Number of attribute entries
HWM of attribute entries
Bytes used by entries
Entries pending delete
HWM of entries pending delete
BGP paths per attribute HWM
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
310
Purpose
Displays the maintenance mode timeout period, after
which the switch automatically returns to normal
mode.
Displays maintenance mode information for Cisco
technical support.
Displays the maintenance-mode section of the running
or startup configuration. The all option includes the
default values.
Displays snapshots present on the switch.
Displays a comparison of two snapshots. The
summary option displays just enough information
to see the overall changes between the two snapshots.
The ipv4routes and the ipv6routes options display
the changes in IPv4 and IPv6 routes between the two
snapshots.
Displays content of the various sections in a generated
snapshot.
Displays the user-specified snapshot sections.
Displays the current system mode. This command
also displays the current state of the maintenance
mode timer when the switch is in maintenance mode.
: 11725
: configuration
: 100
: Running (Isolate)
: Initialized
: OK
: asplain
: 1
: 1
: 100
: 0
: 0
: 3
Configuring GIR (Cisco NX-OS Release 7.3(0)N1(1))
OL-31641-01