Displaying Installation Log Information - Cisco Nexus 5600 Series Configuration Manual

Performing Software Maintenance Upgrades
This example shows how to deactivate a package, commit the changes, and remove the inactive package from
the device:
switch# install deactivate n6000-uk9.7.2.1.N1.1.CSCuw28765.bin
Deactivating a reload SMU requires an explicit reload
and no other operations are permitted on this SMU
until a reload.
Do you want to continue (y/n)?: [n] y
Install operation 21 !!WARNING!! This patch will get activated only after
a reload of the switch. at Tue Oct 13 07:30:00 2015
switch# ureload
WARNING: This command will reboot the system
Do you want to continue? (y/n) [n] y
switch# install deactivate n6000-uk9.7.2.1.N1.1.CSCuw28765.bin
Deactivating a reload SMU requires an explicit reload
and no other operations are permitted on this SMU
until a reload.
Do you want to continue (y/n)?: [n] y
Install operation 21 !!WARNING!! This patch will get activated only after
a reload of the switch. at Tue Oct 13 07:30:00 2015
switch# reload
WARNING: This command will reboot the system
Do you want to continue? (y/n) [n] y
switch# sh install inactive
Boot Images:
Kickstart Image: bootflash:/n6000-uk9-kickstart.7.2.1.N1.0.328.bin
System Image: bootflash:/n6000-uk9.7.2.1.N1.0.328.bin
Inactive Packages:
n6000-uk9.7.2.1.N1.0.294.CSCuw33277.bin
n6000-uk9.7.2.1.N1.1.CSCuw28765.bin
switch# install commit
Install operation 22 completed successfully at Tue Oct 13 07:50:14 2015
switch# install remove n6000-uk9.7.2.1.N1.1.CSCuw28765.bin
Proceed with removing n6000-uk9.7.2.1.N1.1.CSCuw28765.bin? (y/n)? [n] y
Install operation 23 completed successfully at Tue Oct 13 07:50:48 2015

Displaying Installation Log Information

The installation log provides information on the history of the installation operations. Each time an installation
operation is run, a number is assigned to that operation.
• Use the show install log command to display information about both successful and failed installation
operations.
OL-31641-01
Command or Action
Example:
switch# install remove inactive
Proceed with removing? (y/n)? [n] y
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
How to Perform Software Maintenance Upgrades
Purpose
• To remove a specific inactive package from a
storage device, use the install remove command
with the filename argument.
• To remove all inactive packages from all nodes
in the system, use the install remove command
with the inactive keyword.
345