Guidelines And Limitations For System Message Logging; Default Settings For System Message Logging; Configuring System Message Logging; Configuring System Message Logging To Terminal Sessions - Cisco Nexus 5600 Series Configuration Manual

Configuring System Message Logging

Guidelines and Limitations for System Message Logging

System messages are logged to the console and the logfile by default.

Default Settings for System Message Logging

The following table lists the default settings for system message logging parameters.
Table 13: Default System Message Logging Parameters
Parameters
Console logging
Monitor logging
Log file logging
Module logging
Facility logging
Time-stamp units
Syslog server logging
Syslog server configuration distribution
Configuring System Message Logging

Configuring System Message Logging to Terminal Sessions

You can configure the switch to log messages by their severity level to console, Telnet, and Secure Shell
sessions.
By default, logging is enabled for terminal sessions.
Procedure
Step 1
OL-31641-01
Command or Action
switch# terminal monitor
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Guidelines and Limitations for System Message Logging
Default
Enabled at severity level 2
Enabled at severity level 2
Enabled to log messages at severity level 5
Enabled at severity level 5
Enabled
Seconds
Disabled
Disabled
Purpose
Copies syslog messages from the console to the current
terminal session.
97