Cisco Nexus 5600 Series Configuration Manual page 40

Importing a Switch Profile
Step 4
Step 5
Step 6
Step 7
Step 8
The following example shows how to import supported system-level commands excluding the Ethernet
interface commands into the switch profile named sp:
switch(config-vlan)# conf sync
switch(config-sync)# switch-profile sp
Switch-Profile started, Profile ID is 1
switch(config-sync-sp)# show switch-profile buffer
switch-profile
----------------------------------------------------------
Seq-no
----------------------------------------------------------
switch(config-sync-sp)# import running-config exclude interface ethernet
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
18
Command or Action
Example:
switch(config-sync-sp)# import
ethernet 1/2
switch(config-sync-sp-import)#
commit
Example:
switch(config-sync-sp-import)# commit
abort
Example:
switch(config-sync-sp-import)# abort
exit
Example:
switch(config-sync-sp)# exit
switch#
show switch-profile
Example:
switch# show switch-profile
copy running-config startup-config
Example:
switch# copy running-config
startup-config
: sp
Command
Configuring Switch Profiles
Purpose
• <CR>—Adds selected commands.
• interface—Adds the supported commands for
a specified interface.
• running-config—Adds supported
system-level commands.
• running-config exclude interface
ethernet—Adds supported system-level
commands excluding the physical interface
commands.
Imports the commands and saves the commands to
the switch profile.
(Optional)
Aborts the import process.
Exits switch profile import mode.
(Optional)
Displays the switch profile configuration.
(Optional)
Copies the running configuration to the startup
configuration.
OL-31641-01