Table of Contents
Advertisement
On the „Functions" tab, the functions available to the user can
be selected to speed up access to frequently needed functions.
For example, if LED alarm is always active and rate level
indication is never used, these functions can be hidden for the
user.
6.4.6
Writing the configuration to the RadEye
Once the setting of the parameters is finished, these parame-
ters have to be sent to the RadEye PRD by clicking on the
Write to RadEye PRD button.
Parameters including the selected menu configuration can be
saved with File / Save as... as parameter file (*.cfg). A saved
configuration can be reloaded using the menu File / Open...
and sent to RadEye PRD.
6.5
History
Via the Options / History menu, the values stored in the
RadEye PRD-ER data memory can be read out, represented in
a x/t diagram and saved to the hard disk of the computer.
These data subsequently can be read in and further processed
in a spreadsheet program.
Time interval of History storing can be set from 1s to 43200 s
(12 hours). 1600 measurement values can be stored.
6-16
DB-066 E
RadEye PRD-ER
Iw/Tr/Ff 06.07.2015
Advertisement
Table of Contents
