RIGOL
Reading Hold
The reading hold mode allows you to capture and hold a stable reading on the front
panel display. This is useful in situations when you want to take a reading, remove
the test probes, and have the reading remain on the display. When a stable reading
is detected the reading will hold on the display. Hold scope include 0.01%, 0.1%, 1%,
and 10%.
Press
Auto
Table 2-18 Reading Hold Function Menu Explanation
Function
Menu
On/Off
0.01%
0.1%
1%
10%
© Copyright RIGOL Technologies, Inc. 2007.
Hold , enter the menu shown below:
Figure 2-20
Explanation
Turn on/off the reading hold function.
Set the hold scope is 0.01%.
Set the hold scope is 0.1%.
Set the hold scope is 1%.
Set the hold scope is 10%.
Save all changes, back to a higher level menu.
User Manual for DM3000 Series
2-21