Rigol DM3063 User Manual page 105

RIGOL
To set up the name of the scanning task
Press Name, and enter the input interface as the figure shown below.
Where the cursor glittery is the item operating at the current time, use the up/down
key to switch the operating item.
Press Del, delete the letter when it was pitched on.
Press Done after the name was exported confirm using the name for this Scanning
task.
© Copyright RIGOL Technologies, Inc. 2007.
Figure 2－65
Figure 2－66
Figure 2－67
User Manual for DM3000 Series
2-55