RIGOL
Press Done , choose Save or Apply after accomplish to set the needed task.
Press Save, enter the main interface of the scanning task, use the up/down key to
choose the location for storing the file.
Press Save, enter the edit interface of the filename, Input a feat filename so it can be
found out fleetly in the future.
Press Done , then the scanning file will be stored in the appointed location. ( the U
disk operation is similar to the autochthonic, both of them should use the location to
choose and store in the disk A:\)
© Copyright RIGOL Technologies, Inc. 2007.
Figure 2-71
Figure 2-72
图 2-73
图 2-74
User Manual for DM3000 Series
2-57