Rigol DM3063 User Manual page 30

RIGOL
5. Lead test leads into circuit, starts to measurement.
4-Wire Resistance Measurement instruction chart
6. Measurement history data processing
Press History , enter the menu shown below:
To check or save the data that has measured by current measurement function,
you can use the history function. In this function you can get the "Info" (information),
"List" and "Graph" of this measurement. Also, you can save this information data
with pressing the Save softkey.
NOTE
When measuring resistances, you could not touch both ends of the resistance. It
will cause the measurement inaccurate.
1-18
4-Wire Sense HI
4-Wire Sense LO
Figure 1-23
Figure 1-24
© Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
Resistance