Rigol DM3063 User Manual page 29

RIGOL
4-Wire Resistance Measurement
Table 1-6 Resistance measurement characteristics
Seven Range
Max Resolution
Open-circuit
Voltage
Import Protection
Configurable
Parameters
Basic measurement:
1. Connect test leads as Figure 1-23 shown. Red test leads connect the HI Terminal,
Black test leads connect the LO Terminal.
2. Press twice to select the 4-Wire Resistance Measurement
3. According to the resistance measuring scope, choose the correct range.
4. Set the Null setting value
Null computing will be an optional operation, it could be setup in accordance
with users' demand. If user does not implement Null computing, this parameter is
not required, direct implementation of the next step.
(To know the specific setting methods of the Null value setting, please refer to
Chapter 2 "To Set Up Measurement Parameters", Null computing)
© Copyright RIGOL Technologies, Inc. 2007.
Figure 1-22
200Ω, 2kΩ, 20kΩ, 200kΩ, 1MΩ, 10MΩ, 100MΩ
100uΩ
<5V
(1). 200V
PK
(2). 1000V on all ranges (HI Terminal)
Range, Null value
User Manual for DM3000 Series
1-17