RIGOL
Appendix C: General Care and Cleaning
General Care
Do not store or leave the instrument in where the LCD display will be exposed to
direct sunlight for long periods of time.
CAUTION: To avoid damage to the instrument or probes, do not expose
!
Cleaning
If this instrument requires cleaning, disconnect it from all power sources and clean it
with a mild detergent and water. Make sure the instrument is completely dry before
reconnecting it to a power source.
To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the instrument and probes with a lint- free
cloth. Take care to avoid scratching the clear plastic display filter.
2. Use a soft cloth dampened with water to clean the instrument.
NOTICE: To avoid damage to the surface of the instrument or probes, do not use
any abrasive or chemical cleaning agent.
6-8
them to sprays, liquids, or solvents.
User Manual for DM3000 Series
© Copyright Rigol Technologies, Inc. 2007.