RIGOL
To Measure Arbitrary Sensor
To set an arbitrary sensor, you will need to set the sensor name, sensor type, sensor
physical unit, sensor reference data, and arithmetic.
Table 1-11 Period Test characteristics
New
Edit
Load
Display
Basic measurement:
1. Connect test leads as Figure 1-48, 1-49 shown. Red test leads connect the HI
Terminal, Black test leads connect the LO Terminal.
2. Press
to select the Sensor function.
3. Press New ,enter the newly- built sensor reference data file interface.
(1). In New function interface, you are allowed to edit the sensor Name, sensor Type
and physical value Unit of the sensor.
© Copyright RIGOL Technologies, Inc. 2007.
Figure 1-37
Newly built sensor reference data file
Edit a sensor reference data file
Load a sensor reference data file
Set display mode
Figure 1-38
Figure 1-39
User Manual for DM3000 Series
1-29