To Measure Dc Voltage - Rigol DM3063 User Manual

RIGOL

To Measure DC Voltage

In view of DC voltage measurement function, the following part demonstrated how
to link the measurement connection and how to choose measurement functions. The
following practice will gradually guide you to be familiar with the DC Voltage
measurement technique.
Table 1-1 DC Voltage measurement characteristics
Five Range
Max Resolution
Import Protection 1000V on all ranges (HI Terminal)
Configurable
Parameters
Basic measurement:
1. Connect test leads as Figure 1-8 shown. Red test lead connects the HI Terminal,
Black test lead connects the LO Terminal.
2. Press to select the DC Voltage measurement function.
3. According to the voltage measuring scope, choose the correct range.
4. Setup the DC impedance.
Press Res , to setup the DC input impedance. Default value of the DC
input impedance will be 10MΩ, this parameter had been setup, and users may carry
on the DC Voltage measurement directly without modification.
5. Set the Null value
Null computing will be an option operation, it could be setup in accordance with
user demand. If user does not implement Null computing, this parameter is not
© Copyright RIGOL Technologies, Inc. 2007.
Figure 1-7
DC Voltage measurement data interface
200mV, 2V, 20V, 200V, 1000V
100nV
Range, DC impedance, Null value
User Manual for DM3000 Series
1-7