Example 3: Db Measurement - Rigol DM3063 User Manual

RIGOL

Example 3: dB Measurement

Do these steps as follows:
1. Connect test leads as Chapter 1 introduced. Now we want to measure an AC
Voltage. Connect test leads as shown:
2. Press button, select AC Voltage measurement function. Choose a correct
range.
3. Set the Total measurement function parameters.
(1). Press dB , set the dB measurement setting value with the direction key.
(2). Press , save all changes, back to a higher level menu.
4. Start dB measurement.
(1). Press ON , turn on Total measurement function.
(2). Press , finish this setting.
5. Lead test leads into circuit, starts to measure.
3-4
Figure 3-5
Figure 3-6
© Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
AC Voltage