RIGOL
Press Apply button, to use this reference value file.
Press Save to save the file.
Press Save button, to finish the save operation.
Press Apply button, to start the sensor measurement.
(2). Press Edit button, enter the edit function. With this function you can edit the
sensor reference value file that you had saved.
(3). Press Load button, enter the store function interface, you can load the sensor
reference file you had saved.
(4). Press Disp button, you can choose which value will be shown on the display
interface.
© Copyright RIGOL Technologies, Inc. 2007.
Figure 1-44
Figure 1-45
Figure 1-46
Figure 1-47
User Manual for DM3000 Series
1-31