Rigol DM3063 User Manual page 120

RIGOL
(3). Press Unit
When you finish a proper input, press
higher level menu.
3. Press Define, button enter the interface shows below.
4. Press Add button，input the first group of reference value: 111.480Ω、29.5℃。
When finishing this group of reference value, press Done button, save all
changes, and go on inputting other values.
In this interface you are allowed to delete and edit the reference values that you
had inputted, select the group of reference value then press Del or Edit do the
operations that you want to.
When you finish inputting all the data, press
to a higher level menu.
3-8
℃ ，select the unit of the sensor: ℃.
Figure 3－15
Figure 3－16
Figure 3－17
Figure 3－18
© Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
, save all the changes, back to a
and save all the changes, back