Example 1 : Reading Statistic - Rigol DM3000 Series Programming Manual

RIGOL

Example 1 : Reading Statistic

Purpose: To achieve the maximum statistic.
In maximum statistic calculation, the first reading is regarded as the maximum. If
continuing measuring, the multimeter is updating the readings. Until catching the
maximum, the multimeter is beeping(the beeper must be on).
The programming steps:
0 *RST
1 *IDN?
2 :function:voltage:AC
3 :measure AUTO
4 :calculate:function:max
5 :calculate:statistic:max?
6 :calculate:statistic:count? /*query the automatic measurement number*/
Remarks:
1. The fifth command returns the current maximum AC voltage.
2. The sixth command returns the automatic measurement number.
4-2
/*reset */
/*query equipment ID*/
/*turn on AC voltage measure function*/
/*set measure methode as auto*/
/*turn on maximum statistic calculation function*/
/*query the the measurement maximum AC voltage*/
Programming Guide for DM3000 Series
© 2008 RIGOL Technologies, Inc.