Rigol DM3063 User Manual page 39

RIGOL
Period Test
Table 1-10 Period Test characteristics
Range
Measurement Range
Input Signal Range
Import Protection
Configurable Parameters
Basic measurement:
1. Connect test leads as Figure 1-35 shown. Red test lead connects the HI Terminal,
Black test lead connects the LO Terminal.
2. Press twice to select the Period Test.
3. Set the Null value
Null computing will be an optional operation, could be setup in accordance with
users' demand. If user does not implement Null computing, this parameter is not
required, direct implementation of the next step.
(To know the specific setting methods of the Null value setting, please refer to
Chapter 2 "To Set Up Measurement Parameters", Null computing)
© Copyright RIGOL Technologies, Inc. 2007.
Figure 1-34
200mV、2V、20V、200V、750V
0.33s～3.3us
100mVAC~750VAC
750V on all ranges (HI Terminal)
RMS
Null value
User Manual for DM3000 Series
1-27