Rigol DM3063 User Manual page 54

RIGOL
AC Filter
There are three kinds of AC Filter. Choose correct filter may make the measurement
more accuracy. This function could only be used in AC Voltage and AC Current
measurement.
Press Filter , enter the menu shown below:
Table 2-3 AC Filter Menu Explanation
Function Menu
Slow
Mid
Fast
Table 2-4 AC Filter Parameters Characteristics
AC Filter Options
Slow
Mid
Fast
AC Filter
The AC Filter Parameters are saved in the volatile memory, the data will lose when
the power is off.
The default value of AC Filter Parameters is "Mid"(middle)
2-4
Figure 2-3
Explanation
Set up the filter with low speed
Set up the filter with to middle speed
Set up the filter with high speed
Save all changes, back to a higher level menu
Input Frequency
3Hz～300kHz
20Hz～300kHz
200Hz～300kHz
© Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
Setting Timer
1.2 reading/s
0.5 reading/s
0.3 reading/s