RIGOL
To Control Trigger Options
Press
or
to trigger the multimeter. When you start the multimeter, the
Key will turn light, it means this function is running.
Multimeter triggering options include Automatically, Single and Hold.
Auto Triggering
Press
key once, it will takes continuous readings at the fastest rate possible for
the specified measurement configuration.
Single Triggering
Press
key, The multimeter takes one reading, or a number of readings specified
by a sample count you enter.
Holding Triggering
Press
key. The reading- hold mode allows you to capture and hold a stable
reading on the front panel display.
NOTE
Press
key, in Remote Mode, by switching back to the local mode.
© Copyright RIGOL Technologies, Inc. 2007.
Figure 1-57
Trigger Control Keys
User Manual for DM3000 Series
1-37