Configuring Ftp Server Parameters; Configuring Ftp Client Parameters - Dell S6100 Configuration Manual

Hide thumbs Also See for S6100:

Table of Contents

Enable FTP on the system.

CONFIGURATION mode

ftp-server enable

Example of Viewing FTP Configuration

Dell#show running ftp

ftp-server enable

ftp-server username nairobi password 0 zanzibar

Configuring FTP Server Parameters

After you enable the FTP server on the system, you can configure different parameters.

To specify the system logging settings, use the following commands.

Specify the directory for users using FTP to reach the system.

CONFIGURATION mode

ftp-server topdir dir

The default is the internal flash directory.

Specify a user name for all FTP users and configure either a plain text or encrypted password.

CONFIGURATION mode

ftp-server username username password [encryption-type] password

Configure the following optional and required parameters:

username: enter a text string.

encryption-type: enter 0 for plain text or 7 for encrypted text.

password: enter a text string.

You cannot use the change directory (cd) command until you have configured ftp-server topdir.

To view the FTP configuration, use the show running-config ftp command in EXEC privilege mode.

To configure FTP client parameters, use the following commands.

Enter the following keywords and the interface information:

For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the stack/slot/port/subport information.

For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the stack/slot/port/subport information.

For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/slot/port[/subport] information.

For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/slot/port/subport information.

For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the stack/slot/port information.

For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.

For a port channel interface, enter the keywords port-channel then a number.

For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

CONFIGURATION mode