Dell S6100 Configuration Manual page 548

no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 1/1/1/2
no ip address
switchport
no shutdown
!
(Step 3)
interface Vlan 100
no ip address
tagged TenGigabitEthernet 1/1/1/1,1/1/1/2
no shutdown
!
interface Vlan 200
no ip address
tagged TenGigabitEthernet 1/1/1/1,1/1/1/2
no shutdown
!
interface Vlan 300
no ip address
tagged TenGigabitEthernet 1/1/1/1,1/1/1/2
no shutdown
Router 2 Running-Configuration
This example uses the following steps:
1 Enable MSTP globally and set the region name and revision map MSTP instances to the VLANs.
2 Assign Layer-2 interfaces to the MSTP topology.
3 Create VLANs mapped to MSTP instances tag interfaces to the VLANs.
Router 3 Running-Configuration
This example uses the following steps:
1 Enable MSTP globally and set the region name and revision map MSTP instances to the VLANs.
2 Assign Layer-2 interfaces to the MSTP topology.
3 Create VLANs mapped to MSTP instances tag interfaces to the VLANs.
SFTOS Example Running-Configuration
This example uses the following steps:
1 Enable MSTP globally and set the region name and revision map MSTP instances to the VLANs.
2 Assign Layer-2 interfaces to the MSTP topology.
3 Create VLANs mapped to MSTP instances tag interfaces to the VLANs.
(Step 1)
spanning-tree
spanning-tree configuration name Tahiti
spanning-tree configuration revision 123
spanning-tree MSTi instance 1
spanning-tree MSTi vlan 1 100
spanning-tree MSTi instance 2
spanning-tree MSTi vlan 2 200
spanning-tree MSTi vlan 2 300
548 Multiple Spanning Tree Protocol (MSTP)